Benchmark Rum Shop

[Arcmanov]

I took the liberty of 'editing' Saxman's last comment.  They say a picture says a thousand words.....

[Spazosaurus]

^^ hahahahaha

[Eroo]

"The Unknown Obliterator"

CPU: Intel Core 2 Duo e4400 @ 3.5ghz
RAM: 2GB Corsair DDR-2
e-Geforce 8800gts 640 @ 660/990

3d mark 06: 11,498

"please b'leedat"

Main thread

Let me offer you both congratulations and the fact that I hate you

[TriniXaeno]

OMG, vivman, arcman and unknown alyuh over doing it!

I shame to even say I have a computer against scores like these.

and HAHHAHAHA @ arcman signature, that real bad.

[Arcmanov]

Only Ran 2 benchies 3dMark03 and 3dMark06

Ulti's new rig:

Biostar Tf570 SLI
Amd AM2 X2 5000+ 65nm @ 2.6
XFX 8800GTS 320 extreme (560/850x2) - driver version 169.02
2GB OCZ ddr2 800mhz

heres the results:

3dMark03 - 18693
3dMark06 - 9006

O/C gpu only (576/890)

3dMark03 - 19329
3dMark06 - 9067 (Proves CPU limitation)

O/C gpu and cpu only

cpu@2840mhz
gpu@(576/890)

3dMark06 - 9654 (again Proves CPU limitation)
but the cpu reached really high temps (46 C) idles @ 32 C with stock cooler

I feel if I push it I can break the barrier that is 10,000 for me but I'm afraid to fry my chip. 
so until next year, add me to the rankings mwahhahaha!

You may well break the barrier if you OC the GPU a little more.
I have safely run my GTS at 630 core / 950 memory speeds for benchies,
but alas...all GTS cards are not created equal.  Some may achieve a
higher stable OC than mine, while some may not.  You wont know
the upper limits until you really push it.

[Spazosaurus]

I would just like to take this opportunity to point and laugh at those quad core toting b1atches whilst simultaneously pointing them in the direction of the "TOP RIGS" thread to see who's on top. (No names called....)

[Arcmanov]

Biatch....

Lemme only fix my HSF eh...you laugh.

[Philosophical45]

hmmm.. watchin those benchmark results, i feel like a lil ant in a elephant cage.. allyuh scores mad sick.. hmm gimme until august to post something.. i might come a little close..

[Arcmanov]

Jedi...that benchmark link you provided doesn't work.  Fix that, or put a thumbnail.

[.:Jedi:.]

sorry about that. i cant get the actual screenie from 3dmark itself as i havent "cracked" the program. the only way to view the result is on the website. i hope this screen shot of the result on the website would suffice.


not too shabby for a 939 based, all stock cooling system

by the way, captain, i did the "mod" i was telling u about. no "paxx paxx!" yet

edit: sorry for posting the result here. will put it in the correct thread.

[Spazosaurus]

You guys with the overclocking and 3.5 and 3.6ghz speeds, I hope that you're using IntelBurn stress test to make sure that your systems are stable at those speeds. Dont even tell me about prime or orthos. Those are useless.

[Spazosaurus]

12 hours you say? Seems odd that it would run for such a long time, considering that any fault in the cpu is detected in mere minutes.

 How many tests do you run on Intelburn?

Ah...i see the post has been deleted...and not by me.

[IsMe2003]

12 hours you say? Seems odd that it would run for such a long time, considering that any fault in the cpu is detected in mere minutes.

 How many tests do you run on Intelburn?

yeah well that 12 hour time i usually use to put a rediculus number of test as the default 5 or somethign so finish so fast (was still thinkign in the prime mode where longer is better), but now any new oc i trying, i usually do about 20 tests or so, that mustbe to much and all

--------------Edited---------
then i usually leave occt running tell i decide to take it off, one think that the occt sucks in i must admit, if it do bomb out, is alwas some error code that yau ahve no explanation for, so is be hard to figure out what caused it. and yea i noticed the post got deleted i jsut now see this pop up when i went back to the homepage hehe

[Spazosaurus]

Shame you dont have a screenshot of that 12 hour long IntelBurn test eh.

[IsMe2003]

Shame you dont have a screenshot of that 12 hour long IntelBurn test eh.

Shame you dont have a screenshot of that 12 hour long IntelBurn test eh.

dont usually take screen shots of it unless i run into a problem to show some padnas on extreme forums for advice, but if you want i can set some running when meh machien backup and take a screen shot for yua to see

[Spazosaurus]

sure...

[IsMe2003]

sure...

Cool, how much test yua want meh to run when ah up and running, regular ole amount of test as you pointed out it really detects the errors in minutes which is true, vista installing (Frakign cat 8.10 driver)

currently meh cpu on 3.5, trying a new way to oc, before i had 9x400, but i see men say more fsb is better, so i tryign that, and incing up to the 3.6, so i on 8x438 or somethign so at the moment

[Spazosaurus]

Anything over 5 is fine. I usually run 10, but you can run it with how much ever tests you did to make it last 12 hours.

[MessiaaH]

I have screenshot of my 12hour stress using OCCT 3.6GHz OC @ 1.45 Volts. Should i upload?

The first hour of tests are the most intensive. So 5 Hours shoudl be more than enough. but i juss leave my machien runing occt and went to work. came back and he was stil trucking. Stable like ah house.

[IsMe2003]

Anything over 5 is fine. I usually run 10, but you can run it with how much ever tests you did to make it last 12 hours.

ok go run the same 10 like you then and show you it stable after it, boy that 12 hour time i just punch numbers just to get the test running hehehe, but we ent need all that as this thing works diffrently to Prime and them things with the more hours is better business, will just run one now as soon as the machien come up, how long the 10 times is take you?