Author Topic: [Build Log] From Chiller to MO-RA  (Read 15886 times)

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #40 on: July 22, 2013, 03:46:26 PM »
Not only the gpu running parallel, the entire system is in parallel.

It splits off into 3 from the CPU. 1 leg to GPUs, 1 leg to RAM, 1 leg to NB.

The temps of every component was cool like dog nose. 25 Degree territory. GPU's also overclocked to their limits.
And I mentioned the 5GHz, because it's pretty hard to achieve on a 3930k and keep your load temps tamed if your cooling solution is not optimal. (If your load temp on an OC like that crossing 80 Degrees, I not even entertaining that.)

So if you don't call that best results well......

Like I was explaining, it have it's uses. And if it have an option to choose, yes go with the lowest temps, but that's not always the safe option. When dealing with a chiller, you can cause condensation which leads to fried components, so your temps mite be lower for about 1-2 hrs lol.

If the liquid inside the chiller is not exhausted fast enough from the chiller, it could start icing up inside of there also.

Carigamers

Re: [Build Log] From Chiller to MO-RA
« Reply #40 on: July 22, 2013, 03:46:26 PM »

captainchris

  • Guest
Re: [Build Log] From Chiller to MO-RA
« Reply #41 on: July 22, 2013, 04:34:55 PM »
my 3930k was on 5.1 loaded at 65c.. my loop was very good at that time..

but im sticking with my opinion on serial based on my own experience across more than 5 systems.

the cpu still getting a single flow rate because it is only 1 component.

the fact that you have a a chiller says a lot to..

for regular loops..serial works flawless !

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #42 on: July 22, 2013, 04:41:08 PM »
Yes, for regular loops serial is the way to go. But that's not the point.
Is not a matter of which better between serial and para.

I said it have it's uses.........

If all yUh cooling is a cpu and 2 gpus, yes, serial or dedicated loops, no brainer...

So of course yUh have to stick to your opinion for that, because that's all you use.

But the day you start dabbling in chilled / peltier / phase change etc, you're going to have to open up to other configurations. We actually mash up 3 $450 mobo experimenting with pelteir, and all of them spoil because of condensation, and just that 1 drop of water form inside case, drop on something, GG

So yes, I agree, serial ftw in most cases. but not in all. Para does have it's uses.
One side does not fit all.

captainchris

  • Guest
Re: [Build Log] From Chiller to MO-RA
« Reply #43 on: July 22, 2013, 04:46:24 PM »
phase changing is not something i plan to dig up in.. but i get what you are saying..

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #44 on: July 22, 2013, 04:49:15 PM »
I plan to revisit phase/peltier in the future. but the thing with those solution, it not really practical for everyday use.
Whatever OC I achieve on my rig, it does run like that 24/7 for d year.

Peltier/Phase change, even chilled, is more ment for overclock, then scrap. I manage to tweak d chilled to run fine daily, until it get that stupid leak. I go find a way to make TEC/Phase practical for daily in the future.

But for now I want my machine back up to game lol.

Carigamers

Re: [Build Log] From Chiller to MO-RA
« Reply #44 on: July 22, 2013, 04:49:15 PM »

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #45 on: July 27, 2013, 10:32:31 PM »
Day 6

More Storage, More Storage, More Storage!










Onboard raid was giving like 35-45 MB/s.
Areca RAID went up to 150~MB/s.  :sassy:

Serial GPU Water Bridge also installed. GPUs Idle 25, Load 45

Now to migrate data to new Array, then neaten up and lock up case and project done!

Offline firstchoicett

  • Chunin
  • **
  • Posts: 337
  • Country: 00
  • Chakra 10
  • Titan FTW
  • Referrals: 1
    • View Profile
    • bdpkclan
  • CPU: i7 3970X
  • GPU: 3 X Titan 6GB
  • RAM: 960GB SSD
  • Broadband: 1GB Dual Fiber
  • PSN: www.firstchoicett.com
  • Steam: firstchoicett
Re: [Build Log] From Chiller to MO-RA
« Reply #46 on: July 27, 2013, 11:27:20 PM »
Nice

Sent from my GT-I9500 using Tapatalk 2


IM STOCK CAN I HELP YOU

captainchris

  • Guest
Re: [Build Log] From Chiller to MO-RA
« Reply #47 on: July 27, 2013, 11:37:12 PM »
my lawd messiah.. i must ask! WT actual FU!k dan! what do you plan to do with such opulence amounts of space!?

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #48 on: July 27, 2013, 11:49:49 PM »
my lawd messiah.. i must ask! WT actual FU!k dan! what do you plan to do with such opulence amounts of space!?

LoL, I only watch bluray quality stuff. One of my movies is typically 50gb, series is usually 5-10gb per ep.
Also need space for bigger VM Labs.
Space for d full res pics/videos meh 1020 & dslr go be taking.
HD Music, apps, etc.

I actually missing alot of stuff, go be able to get more content now. Hope this do for d next year, then will go 4tb drives for ah 20TB array, use old drives for backups.

Have a 4TB nas they with other stuff too that ill be migrating to the new array, then use said nas for backups.
« Last Edit: July 28, 2013, 12:00:32 AM by MessiaaH »

captainchris

  • Guest
Re: [Build Log] From Chiller to MO-RA
« Reply #49 on: July 27, 2013, 11:59:46 PM »
alright. justified quite well!

looking good!

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #50 on: July 28, 2013, 08:40:17 PM »
Ah Done!

This rad rel sick, can run machine with fans off and temps good. Combined with this PSU on fanless mode, and I have an extremely quiet beast machine. When time to game, flip meh switch, fans on, PSU autoswitch to fan mode.

Chiller clearly offers better thermal performance, but the advantage of no noise, and less current, I cant complain.






























Offline firstchoicett

  • Chunin
  • **
  • Posts: 337
  • Country: 00
  • Chakra 10
  • Titan FTW
  • Referrals: 1
    • View Profile
    • bdpkclan
  • CPU: i7 3970X
  • GPU: 3 X Titan 6GB
  • RAM: 960GB SSD
  • Broadband: 1GB Dual Fiber
  • PSN: www.firstchoicett.com
  • Steam: firstchoicett
Re: [Build Log] From Chiller to MO-RA
« Reply #51 on: July 29, 2013, 07:02:47 AM »
Looking real clean and nice.

Sent from my GT-I9500 using Tapatalk 2


IM STOCK CAN I HELP YOU

Offline MessiaaH

  • Global Moderator
  • Akatsuki
  • *
  • Posts: 4465
  • Country: ky
  • Chakra 6
    • :ps3: :wii:
  • Referrals: 2
    • View Profile
    • Youtube Channel
  • CPU: i7 3930k @ 5.0GHz
  • GPU: 3 * Nvidia GTX 680 (Liquid Cooled)
  • RAM: 64GB Corsair Vengence
  • BattleNet ID: MessiaaH / 350
  • XBL: MesssiaaaH
Re: [Build Log] From Chiller to MO-RA
« Reply #52 on: July 29, 2013, 09:42:16 AM »
Thanks

Offline W1nTry

  • Administrator
  • Akatsuki
  • *****
  • Posts: 11329
  • Country: tt
  • Chakra 109
  • Referrals: 3
    • View Profile
  • CPU: Intel Core i7 3770
  • GPU: Gigabyte GTX 1070
  • RAM: 2x8GB HyperX DDR3 2166MHz
  • Broadband: FLOW
  • Steam: W1nTry
  • XBL: W1nTry
Re: [Build Log] From Chiller to MO-RA
« Reply #53 on: July 29, 2013, 06:38:45 PM »
Wtf yo! dat man rig got a fridge!  Lol,  Nice

Sent from my MB865 using Tapatalk 2


Carigamers

Re: [Build Log] From Chiller to MO-RA
« Reply #53 on: July 29, 2013, 06:38:45 PM »

 


* ShoutBox

Refresh History
  • Crimson609: yea everything cool how are you?
    August 10, 2022, 07:26:15 AM
  • Pain_Killer: Good day, what's going on with you guys? Is everything Ok?
    February 21, 2021, 05:30:10 PM
  • Crimson609: BOOM covid-19
    August 15, 2020, 01:07:30 PM
  • Shinsoo: bwda 2020 shoutboxing. omg we are in the future and in the past at the same time!
    March 03, 2020, 06:42:47 AM
  • TriniXjin: Watch Black Clover Everyone!
    February 01, 2020, 06:30:00 PM
  • Crimson609: lol
    February 01, 2020, 05:05:53 PM
  • Skitz: So fellas how we go include listing for all dem parts for pc on we profile but doh have any place for motherboard?
    January 24, 2020, 09:11:33 PM
  • Crimson609: :ph34r:
    January 20, 2019, 09:23:28 PM
  • Crimson609: Big up ya whole slef
    January 20, 2019, 09:23:17 PM
  • protomanex: Gyul like Link
    January 20, 2019, 09:23:14 PM
  • protomanex: Man like Kitana
    January 20, 2019, 09:22:39 PM
  • protomanex: Man like Chappy
    January 20, 2019, 09:21:53 PM
  • protomanex: Gyul Like Minato
    January 20, 2019, 09:21:48 PM
  • protomanex: Gyul like XJin
    January 20, 2019, 09:19:53 PM
  • protomanex: Shout out to man like Crimson
    January 20, 2019, 09:19:44 PM
  • Crimson609: shout out to gyal like Corbie Gonta
    January 20, 2019, 09:19:06 PM
  • cold_187: Why allur don't make a discord or something?
    December 03, 2018, 06:17:38 PM
  • Red Paradox: https://www.twitch.tv/flippay1985 everyday from 6:00pm
    May 29, 2018, 09:40:09 AM
  • Red Paradox: anyone play EA Sports UFC 3.. Looking for a challenge. PSN: Flippay1985 :)
    May 09, 2018, 11:00:52 PM
  • cold_187: @TriniXjin not really, I may have something they need (ssd/ram/mb etc.), hence why I also said "trade" ;)
    February 05, 2018, 10:22:14 AM

SimplePortal 2.3.3 © 2008-2010, SimplePortal