Author Topic: Conroe (Read 5687 times)

Prowl · « **on:** September 15, 2006, 11:01:51 PM »

This is trinimc in prowls room on his latpop, listening to germans dying.. after many long weeks the system works, benchmarks soon... Cod 2 maxed out... : D

Carigamers · « **on:** September 15, 2006, 11:01:51 PM »

Prowl · « **Reply #1 on:** September 16, 2006, 12:11:47 AM »

Fell the power

3dmark 06 bench as soon as it down loads

my E6600 is delayed due to beago's order and my p5w64 delayed but the E6300 is running nicely

TrinireturnofGamez · « **Reply #2 on:** September 16, 2006, 12:30:39 AM »

This is barely pushing it , stock volts , one stick of ram , no video overclocking .......... : ) you'll see more soon...

Its running pr0wl's ram... mine isn't compatible , its up by him : ( Only got to enjoy a quick game of cod 2 where i was dying plenty from enjoying gfx... 1600x1200 with HDR!! smooth like silk

I smell crixx!

benches were run @ 2.33ghz for the cpu , stock everything else

Crixx_Creww · « **Reply #3 on:** September 16, 2006, 01:03:37 AM »

Prowl · « **Reply #4 on:** September 16, 2006, 02:32:58 AM »

4600 3dmark06, not to shabby

this lil 6300 is sooo sweet! and the heat sink is cool to the touch @ 2.4, the north bridge is just warm after 1 hr cod2

Carigamers · « **Reply #4 on:** September 16, 2006, 02:32:58 AM »

Crixx_Creww · « **Reply #5 on:** September 16, 2006, 03:01:35 AM »

liking those scores indeed

loving the 2.4! what heet sink and or fan yu using?

and nice fsb as well. what are your ram timings at

Prowl · « **Reply #6 on:** September 16, 2006, 03:33:42 AM »

stock hsf, seems fine for a 600 mhz oc, ram is 3--3-3-10 666mhz, does 400 fsb but then the cpu starts to warm up so will leave at 333.

Crixx_Creww · « **Reply #7 on:** September 16, 2006, 03:42:24 AM »

excellent timings

Prowl · « **Reply #8 on:** September 16, 2006, 11:59:01 AM »

btw

hehe

Crixx_Creww · « **Reply #9 on:** September 16, 2006, 09:31:05 PM »

bess can of baygon an bess jumper cables for dat setup

BountyHunter#1 · « **Reply #10 on:** September 16, 2006, 11:03:02 PM »

lol! dont fugett the level dish set iwmc!! bore!

Beomagi · « **Reply #11 on:** September 16, 2006, 11:29:09 PM »

Very nice.

The e6300 is the next 100% oc chip. you can manage a 50% if your sink is a good 3rd party sink, and if you've got a good mobo and not unlucky on the chip. Seen several of 3.0GHz reviews. One got unlucky (think it was anandetch..) but in general on xtremesystems, with gigabyte and asus boards, they're getting 2.8GHz and above (400MHz fsb). One chip that truly deserves good ram (to not be the cause of low clock as fsb - read: minimum ram speed - can get high).

Prowl · « **Reply #12 on:** September 17, 2006, 01:06:35 AM »

400 fsb is easy, did 2.8 but the temps ramped up real fast and only have stock cooler so back to 2.2 300 fsb, just waiting till the e6600 gets here

TriniXaeno · « **Reply #13 on:** September 17, 2006, 02:04:16 AM »

omfg those are some impressive numbers!

* [X]-Baego runs into the nearest wall

That 3dmark 2001 score was like a slap in the face. I have never seen it cross 20,000 in real life. Ever.

The 2006 scores are bit more normal, as 3d performance is the real limit there but still impressive given the setup.

Well done.

Can't wait to see the 6600 numbers at stock when you have yours up and running.

Month end I'll order mine.

Crixx_Creww · « **Reply #14 on:** September 17, 2006, 11:31:57 AM »

hmm i used to get 24k in 2001 with the 5950xt

but oc on that e6300 is such a beauty!!!

baego what was that game yu have that wont let yu play unless its a 2ghz and over chip?
give brendan dat so he could see if it will work.

TriniXaeno · « **Reply #15 on:** September 17, 2006, 10:10:19 PM »

serious??? what cpu you had??

cause 3dmark 2001 scores are more limited by cpu than gpu. My 7600 didn't post those sort of figures because of the cpu holding it back.

the game in question is Rise of Legend. Bess game.

I'll throw it his way.

TrinireturnofGamez · « **Reply #16 on:** September 25, 2006, 12:29:12 AM »

more conroe tidbits : Temps are reported below 50 degrees on stock speed , idling at 42 and loading at 49 , but @ 2.3 , stock volts it goes into the 50s .

System isn't as snappy as you' d expect it with two high speed cpus , winnie was right ,you'd want a RAID to get serious multitasking, also a few windows updates help a bit too , windoze isnt' optimized for dual cores though ,i 'm sure a good unix distro will move much better with it.

TriniXaeno · « **Reply #17 on:** September 25, 2006, 07:29:22 AM »

not snappy??

If a core 2 duo, x1800xt and 2gig of ram doesn't make a machine snappy.....what will???

TrinireturnofGamez · « **Reply #18 on:** September 25, 2006, 08:23:45 AM »

its snappy : P but not two or three times as fast as my athlon XP like i expected , it should reach there when i get a 2nd hd

Prowl · « **Reply #19 on:** September 29, 2006, 08:26:11 PM »

Not snappy!!

well I'll show you snappy in 1 week!

P5w64ws pro on the way, USPS paid to replace the E6600 they lost ( Hurray for insurance ) and it's on a fedex truck now.

the 1900gt is here

the ocz platinum ram is in your machine!

case and psu sitting under the desk

have a few spare hds kicking around to!

So prepare for real ownage!

Carigamers · « **Reply #19 on:** September 29, 2006, 08:26:11 PM »

Author Topic: Conroe (Read 5687 times)

Carigamers

Carigamers

Carigamers

ShoutBox