======Day 3 - Troubleshooting, Resolution and 2nd Kicker Install=======After installing the first kicker and testing, there were a few problems.
Problems:
Force feedback was left heavy on the chair. Also after a short period of loud listening, the kicker would shut off. Also I was hearing audible noise from something I could not identify. I observed the kicker in motion whiles playing, and noticed the 5/8s board, though bolted onto the chair, was being flexed by the vibration of the kicker along the center, and was happening so quickly it was displacing the air and causing audible noise. Also because the kicker was in actual motion (which it should not be) the wires from the amp were arcing off and the kicker. I saw blue flames at one point!
Resolutions:
I doubled up on the board, so I used wood glue, clamps, and combined 2 x 5/8s pieces. This resolved the vibration flexing issue and stabilized the kicker.
I bought a 2nd Kicker and Amp and installed onto the right side of the chair. I then wired the left kicker to Left Audio Channel, and Right to Right. And ended up with stereo force feedback. And the end result surprised even me.