Author Topic: Project RampageIVextreme Codenamed: PRIVE (Read 21430 times)

captainchris · « **on:** March 29, 2012, 01:46:16 PM »

Stay tuned for work log write up and pictures of build log.

Parts being used:

Water cooling to be determined still

ASUS RIVE 2011 board
Intel Core i7 3930k
16GB Corsair Vengeance
120gb SSD
AMD HD 6990 ( changing soon )
Rosewil 1000w PSU ( temp )

LOADS of cable management items from amazon by NZXT

Ideas thus far:

Case will be painting over completely. The front red parts will be matte blacked and red stripped.
Inside will be blacked out completely as well as cable management done right down to the power button cable. Will be following the RED and Black Theme with UV reactive green coolant in clear tubing for the WC part.
Under the board will be lined with SMD LEDS for a glow when the PC is powered on.

More to come

Carigamers · « **on:** March 29, 2012, 01:46:16 PM »

captainchris · « **Reply #1 on:** March 29, 2012, 08:20:35 PM »

CASE TO BE BUTCHERED :

HAF 932 AMD EDITION

Spazosaurus · « **Reply #2 on:** March 29, 2012, 08:31:09 PM »

Really? Hot pink? Complete with hot pink sata cables? I think you should change the codename to barbie.

captainchris · « **Reply #3 on:** March 29, 2012, 08:34:22 PM »

^^ HAR HAR HAR HAR......

Real men use hot pink buddie!

W1nTry · « **Reply #4 on:** March 30, 2012, 07:58:05 AM »

Isn't it red?

Sent from my MB865 using Tapatalk

Carigamers · « **Reply #4 on:** March 30, 2012, 07:58:05 AM »

captainchris · « **Reply #5 on:** March 30, 2012, 09:39:31 AM »

phone camera flash made it look pink

captainchris · « **Reply #6 on:** March 31, 2012, 08:55:55 PM »

update tonight..

Coolermaster realy know how to make a case boy..WOW

captainchris · « **Reply #7 on:** March 31, 2012, 09:15:09 PM »

NB: IT IS NOT PINK..... PHONE'S CAMERA SETTING ME UP

TIME TO GET RID OF ALL THOSE WIRES:

SCREWS

SCREWS SCREWED

DO I REALLY NEED ALL THESE....THINGS.....?

LOOK HOW EZ COOLERMASTER MADE IT FOR ME TO REMOVE THE BUTTONS:

TO MASK OFF AND PAINT ( TOMORROW )

MORE SCREWS

EZ REMOVABLE BAY COVERS

SCREWS OUT, JUST PUSH UP AND OUT IS POPS

TO BE WET SANDED AND PAINTED TOMORROW

EXPANSION SLOTS CLAMP MECHANISM

TO BE POWDER COATED

Arcmanov · « **Reply #8 on:** March 31, 2012, 10:07:34 PM »

SwiftKeyed from my Samsung Galaxy S2 with Tapatalk

captainchris · « **Reply #9 on:** March 31, 2012, 10:17:44 PM »

scrapped it in my room, at night..

work bench in work shed downstairs... i will paint and shiz there

captainchris · « **Reply #10 on:** April 01, 2012, 08:41:43 PM »

THIS DAMN LOGO IS BLASTED METAL FUSED TO THE GRILL, SO PAINTING OVER IT

GOODBYE PINK

HELLO SEXI- FIRST OF 6 MIST COATS

SEXINESS!!

MISSION SUCCESSFUL?!?!- ONLY 2 COATS TO GO AGAIN

Netizen1 · « **Reply #11 on:** April 01, 2012, 10:04:20 PM »

question... what paint are you using?

captainchris · « **Reply #12 on:** April 01, 2012, 10:16:42 PM »

regular 20$ can of matte black

its how you apply it.

mist.. can is approx. 1.5ft away from the object, also not spraying continuously.

captainchris · « **Reply #13 on:** April 03, 2012, 12:11:17 AM »

This section of the FORUM real dead yo. No one has not done a single thing to their rig since? AHH

Well here is a small update:

GAVE THESE THEIR FIRST COAT

LEFT THOSE TO DRY AND TAPED THESE OFF IN THE MEAN TIME

THEN BACK PAINTING AGAIN.. CHERRY RED INSERTS >> LOOKS PALE, JUST FIRST PRIMER COAT

STARTED ON THE HARDEST PIECE. WHICH ALSO TOOK 1/2 CAN OF PAINT!

Left all those to cure extra long due to the fact they will be the fore most part of the case being handled, need the paint layers cured evenly so if it gets dinged, the original red wont show up.

captainchris · « **Reply #14 on:** April 03, 2012, 12:13:54 AM »

Comments/ideas/questions welcomed!

Netizen1 · « **Reply #15 on:** April 03, 2012, 07:22:01 AM »

I tried this myself on my CM690 but I had no exp. painting, neither were the guides online any help.

Painted the plain grey/silver parts of the case black so that it would look almost like the newer CM690 II... the paint flaked almost immediately, even after coating with primer and spraying twice.

I guess my technique was flawed; I'm too lazy to do it over though

W1nTry · « **Reply #16 on:** April 03, 2012, 08:55:07 AM »

I have five touch up work on my haf 932 and thermaltake soprano both with good results. If the paint flaked I'd suspect 1 of 2 things: poor case surface to begin with or bad paint.

Sent from my MB865 using Tapatalk

captainchris · « **Reply #17 on:** April 03, 2012, 08:56:24 AM »

If you ever need that help again. This is what you do:

1. Make sure you surface to be painted is clean from dust. This actually prevents the paint from painting the actual area you desire.

2. Always primer lightly, then go on a bit more after. Hold can at minimum 1ft away.

3. Try to be as consistent as possible with even layers and keep you hand moving at all times not to over spray one area.

4. Keep the layers thin after that but with full coverage. 3 is the magic number, but personally i go for at least 5.

That is what I do based on experience with chemicals. Just patience.

captainchris · « **Reply #18 on:** April 05, 2012, 12:05:39 AM »

THANKS FOR THE WHEEL LOCKS COOLER MASTER. PREVENTED THE DAMN THING FROM MOVING AROUND WHILE SPRAYING.

RAN INTO A SMALL PROBLEM. SEEMS SINCE THE CASE BEEN SITTING FOR 2 WEEKS IT GOT SOME DUST INSIDE ON THE FLOOR. IT CAUSED SOME PROBLEMS WITH THE PAINT, CHANCES ARE I WILL HAVE TO SAND THE AREA AND RE-COAT.