Author Topic: Interesting 8800 GTX Fix (Read 6435 times)

woodyear99 · « **on:** May 30, 2009, 01:23:24 PM »

This fellow had some issues with his 8800gtx and attempted to reflow it using his oven. Similar idea is used when trying to repair the 360 RROD, heat it up to allow cold solder joints to reconnect. Never saw this technique before though lol, probably not going to last in the long term.

http://hardforum.com/showthread.php?t=1421792

Carigamers · « **on:** May 30, 2009, 01:23:24 PM »

TrinireturnofGamez · « **Reply #1 on:** May 30, 2009, 07:25:36 PM »

i have an old 6600gt that fried a while back ,i'll see if i can find it and try it out, no longer have an AGP system to see if it works though, i'll probably gift it to a friend.

woodyear99 · « **Reply #2 on:** May 30, 2009, 08:28:30 PM »

Hmm this one showed symptoms with red lines, dunno what other diagnosis they did to figure out baking was a good option lol.

Spazosaurus · « **Reply #3 on:** May 30, 2009, 10:03:57 PM »

Well you KNOW that anytime I encounter a video card again that's showing artifacting and locking up, is in the oven it going...

woodyear99 · « **Reply #4 on:** May 30, 2009, 10:06:43 PM »

Quote from: Captain Awesome on May 30, 2009, 10:03:57 PM

Well you KNOW that anytime I encounter a video card again that's showing artifacting and locking up, is in the oven it going...

Lol hmm I wonder if this can be extended to other products laptop not working....throw it in the oven :p

Carigamers · « **Reply #4 on:** May 30, 2009, 10:06:43 PM »

UltimateGamer · « **Reply #5 on:** August 22, 2009, 05:24:36 AM »

Well fellas, we know the rules of necro, but i didn't want to start a new thread, since it was here that i get this info from first.

About 1-2 Months ago i built a PC for a lady, d same one who get the Monitor with the dead pixel in it. Anywho, she call and say that it freezing, so i tell she to drop by d office and i go take a look at it. Now, the graphics card that she had in it was the only used part, an 8800GT that i was sporting in my PC.

I turn on she system and it have red and blue wavy lines all over the monitor so i know instantly is gpu (3 gpu's died on me so far). I switch to onboard to confirm, and it works. Now i contemplating what i could do to help the lady out, she have warranty on the rest of the parts, but none on the gpu (she was ok with that). So see yuh boy jump on the net to check out this fix i remember somebody post here a while ago.

Now, i have lots to thank woodyear for because, this sh!t works well. Simple steps.
1 - Preheat oven to 385 F
2 - Remove heatsink
3 - Clean off thermal paste
4 - Place in a baking pan lined with aluminum foil, using 3 - 4 balls built of foil to avoid touching the pan (so its suspended)
*also be sure that the foil balls are not touching any of the circuitry - place GPU side down
5 - Bake from 6 - 10 minutes in the ovens lowest shelf (I did mine for exactly 8 mins).
6 - Remove from oven, and let cool for an hour (I did it for 30 mins)
7 - Reapply fresh thermal compound (I use arctic silver)
8 - Mount back the heatsink and marvel at an oven!!!

I wanted to let all you fellow gatters know that this works, so you wont't do like me and throw out 3 "spoiled" graphics cards. If you've got no warranty and an oven, you have a good chance of getting back up an running within 2 hours.

TriniXaeno · « **Reply #6 on:** August 22, 2009, 07:55:29 AM »

hahhahaha, UG, you are insane!

and the instructions sounding like a bess recipe from the naparima girls cook book

Spazosaurus · « **Reply #7 on:** August 22, 2009, 09:50:07 AM »

U kidding me right? It actually work???

UG: Ma'am, I fixed the problem. Your PC is ok now.
Customer: Excellent. Thank you very much. Oh, by the way, what was the problem?
UG: The video card was giving trouble.
Customer: So what did you have to do? Replace it?
UG: *Mutters under breath* I ummm...I baked it.
Customer: You did what now?
UG: I replaced it, yea.

Eroo · « **Reply #8 on:** August 22, 2009, 10:58:52 AM »

Is this something similar yet a lot more crazy to the xbox towel trick where the heat resolders the connections?

UltimateGamer · « **Reply #9 on:** August 22, 2009, 05:15:03 PM »

@noob - lol, i was skeptical but she en have no money so it was worth ah try

@capt - I ent goin an tell she how ah fix it, but the rest of the conversation is spot on

@eroo - Thats the concept exactly.

Arcmanov · « **Reply #10 on:** August 22, 2009, 09:25:42 PM »

+1 to you sir...

Spazosaurus · « **Reply #11 on:** August 22, 2009, 10:01:06 PM »

^^ like a man discover bound in blood. That was an epic game.

Arcmanov · « **Reply #12 on:** August 22, 2009, 10:47:11 PM »

Yep. Dare I say it actually looks better than Crysis?

Crixx_Creww · « **Reply #13 on:** August 23, 2009, 08:48:36 AM »

dread wow, i have a compound problem of vista is playing de *&^&(*&^*^*(^ ass
refuses to boot, attempts at bootin into safe mode stopping at crcdisk.sys and vista recovery fails hard. The only software update i did prior to this failure is a windows update

yay me.

Lol an on top of that, the same time it refusing to boot, i swear my old crt monitor decide to crap out, was getting green and blue sqiggly lines down the screen, no scene swap out to lcd monitor.... same sqiggly lines... sigh. logic dictates must be the card.

Decided well hear wah, if i get de mc vista to work again... ah go sweat dow2 wit de lines lol.

Logged unto gatt for first time in days (from laptop, drive still playin de ass)
and see this fix.. lol and i have a 8800 gts.

Moms real in de kitchen performing sunday lunch bankai doh... so that go wait for when i fix the vista issue. I cah believe this is working thouogh lol lol

woodyear99 · « **Reply #14 on:** August 23, 2009, 11:34:12 AM »

Lol I was hoping someone on gatt would try this fix. Take pics of your cooking lol. It is risky and well who knows how long it will last, but it is worth a shot if you got no other options :p

UltimateGamer · « **Reply #15 on:** August 23, 2009, 03:27:26 PM »

And i was going to take pics of my exploits eh no. Just that it waz done half past two in d morning when i decided to try, didn't have time for dat.

I want to see the results from crix try

Arcmanov · « **Reply #16 on:** August 23, 2009, 03:55:29 PM »

What amazes me is that the plastic stuff on the card didn't melt. Granted, you took off
the heatsink and fan, but aren't there a lot of little plastic bits all over the PCB?

Spazosaurus · « **Reply #17 on:** August 23, 2009, 04:21:17 PM »

You know, thats a good point. I dont know there to be that many plastic parts on a pcb other than the power connector, but still. How come that didnt melt?

UltimateGamer · « **Reply #18 on:** August 23, 2009, 05:53:04 PM »

Well from what i read, different plastics have different melting points (obviously), but here are some that i found

The melting point of HDPE (High Density Polyethelyne) is about 130 ºC
The melting point of LDPE (Low Density Polyethelyne) is about 110 ºC
The melting point of PET (Polyethylene terphthalate) is about 250—260 ºC
The melting point of PP (Polypropylene) is about 160—170 ºC
The melting point of PS (Polystyrene) is about 70—115 ºC
The melting point of PVC (Polyvinyl Chloride) is about 75—90 ºC

The temperature of my oven was 385 F which is 196 C. its probable that the temperature the plastic melts is higher than the given temp of 385. It was also said that this "baking" method is what the companies do to set the solder on their electrical components

Crixx_Creww · « **Reply #19 on:** August 23, 2009, 06:32:00 PM »

gotta get some precision screws and get back my tube of thermal paste befre i go ah baking

but fixed the vista issue atleast. meh

Carigamers · « **Reply #19 on:** August 23, 2009, 06:32:00 PM »

Author Topic: Interesting 8800 GTX Fix (Read 6435 times)

Carigamers

Carigamers

Carigamers

ShoutBox