Author Topic: POST PICTURES OF YOUR Rig (Read 55359 times)

Snowtiger · « **Reply #180 on:** July 27, 2011, 11:29:26 AM »

Awwwww, I'm sowwy Wyatt

Carigamers · « **Reply #180 on:** July 27, 2011, 11:29:26 AM »

Notnice · « **Reply #181 on:** July 29, 2011, 06:45:57 PM »

chronic3ne told me to put you these pic's of his pc for him.

He'll tell you about his spec when he gets time

EmperorXavier · « **Reply #182 on:** July 30, 2011, 09:45:08 AM »

chronic3e rig lookin real damn good that H80 does real reduce footprint in a case boi

TriniXaeno · « **Reply #183 on:** July 30, 2011, 10:11:36 AM »

most impressive.

Let him buss the vantage benchmark on it.

Arcmanov · « **Reply #184 on:** July 30, 2011, 02:07:05 PM »

Is that a Samsung P2770 monitor I spy?

Carigamers · « **Reply #184 on:** July 30, 2011, 02:07:05 PM »

Notnice · « **Reply #185 on:** August 06, 2011, 09:25:28 PM »

Painted the case black

EmperorXavier · « **Reply #186 on:** August 07, 2011, 12:09:53 AM »

Quote from: Notnice on August 06, 2011, 09:25:28 PM

Painted the case black

nice !!

Spazosaurus · « **Reply #187 on:** August 21, 2011, 01:04:14 AM »

http://s115.photobucket.com/albums/n310/daaaknite/Antec%20900%20Case%20Mod/

Spent the day doing some mods on my trusty old Antec 900. I say the old girl has some life in her yet!

Naturally, I took some before and after pics.

Cut some holes to run cables through, flipped the psu and cut the needed hole for air intake. PSU now draws in cool air from under the case instead of hot air from inside the case, cut the backplate for access to the rear side of mount for CPU cooler w/o having to remove he entire board, painted in matte black for neater finish.

EmperorXavier · « **Reply #188 on:** August 21, 2011, 08:12:03 AM »

Awesome that is a real good work they man.. but only spoil children like u can do that to ur case. I give u a 9/10 I deduct one point becaue of the drawing LOL..It looked real "special"

EmperorXavier · « **Reply #189 on:** August 21, 2011, 08:26:46 AM »

but wait na awesome.. is that ur optical drive at the bottom of ur case ur HDDs to the top??

Philosophical45 · « **Reply #190 on:** August 21, 2011, 08:30:26 AM »

that's a cool mod, that's how the original Antec 900 should have been yes. How does the back look, did you get to put on the right side panel with ease? or you had to use some extrta force lol

Saxito Pau · « **Reply #191 on:** August 21, 2011, 09:06:41 AM »

Nice mod, awesome.

I would strongly recommend powder coating....

Then again, I still owe y'all pics of my powder coated case. That will happen today.

Spazosaurus · « **Reply #192 on:** August 21, 2011, 09:48:47 AM »

Yeah emperor, hdds on top, optical underneath.

Philo, for real @ how it should have been originally. I got the side panel on with a little bit of force, no real distinguishable belly...

Not sure how well that pic represents it but looks like I flattened the cables sufficiently as to not cause a belly.

Sax, powder coat? I am unfamiliar with that technique.

Sent from my Inspire 4G using Tapatalk

Berzerk · « **Reply #193 on:** August 21, 2011, 11:45:31 AM »

nice work. Have exact same case, was going to get a new case, but after seeing this, might try a ting as well oui.

phoenix31tt · « **Reply #194 on:** August 22, 2011, 12:22:17 PM »

yup did almost the same mod to my 900... and i think there is a V2 of the 900 with the cable holes already.

MentalJack · « **Reply #195 on:** September 06, 2011, 04:41:38 AM »

CPU: Intel i7 CPU 960 @3.2ghz Overclocked 4.11ghz
GPU: EVGA Geforce GTX 590
RAM: Corsair Dominator 18 GB 1600 MHz PC3-12800 240-Pin DDR3
MOTHERBOARD: ASUS Rampage III Extreme
SOUND CARD: Sound Blaster X-Fi Surround 5.1 Pro
POWER SUPPLY: XFX 850w Black Edition
OS: Windows 7 Ultimate x64
CPU COOLER: ZALMAN CNPS11X Extreme

EmperorXavier · « **Reply #196 on:** September 06, 2011, 05:43:09 AM »

nice rig loving the mb especially.. but everything hardly fits in there do u get high temps?
=[PT]=

abritto19 · « **Reply #197 on:** September 06, 2011, 09:30:13 AM »

My desktop replacement....Alienware m17x r2
17" 1920x1200 RGB LED display
Nebula RED colou
1.73GHz Intel Core i7-820QM quad core processor
8GB DDR3 1333mhz memory
Dual (2) 640GB 7200RPM hard drives( all your storage needs)
Dual (2) 1GB ATI HD 4870 graphics cards( Can get more than 15,000 3dmark 06 points without overclocking)
SuperMulti slot-loading DVD burner
Intel Centrino Ultimate-N 6300 AGN WiFi, Gigabit Ethernet, Bluetooth (Ultimate wifi)
Webcam
9 cell battery
Windows 7 Home Premium 64 bit
Backlit keyboard

Notnice · « **Reply #198 on:** September 06, 2011, 12:22:10 PM »

Quote from: abritto19 on September 06, 2011, 09:30:13 AM

My desktop replacement....Alienware m17x r2
17" 1920x1200 RGB LED display
Nebula RED colou
1.73GHz Intel Core i7-820QM quad core processor
8GB DDR3 1333mhz memory
Dual (2) 640GB 7200RPM hard drives( all your storage needs)
Dual (2) 1GB ATI HD 4870 graphics cards( Can get more than 15,000 3dmark 06 points without overclocking)
SuperMulti slot-loading DVD burner
Intel Centrino Ultimate-N 6300 AGN WiFi, Gigabit Ethernet, Bluetooth (Ultimate wifi)
Webcam
9 cell battery
Windows 7 Home Premium 64 bit
Backlit keyboard

Not bad at all

EmperorXavier · « **Reply #199 on:** September 06, 2011, 01:37:21 PM »

i love Alienware
=[PT]=

Carigamers · « **Reply #199 on:** September 06, 2011, 01:37:21 PM »

Author Topic: POST PICTURES OF YOUR Rig (Read 55359 times)

Carigamers

Carigamers

Carigamers

ShoutBox