tips and ways to unbrick a v8 wrt54g

[Fkacn_tt]

i just bricked my wrt54g when trying to flash it with dd-wrt micro 2.4, well i'm not sure if its bricked but it keeps reboot after it starts up continuously, the problem i think occured when i tried to update it using the vmxkiller over a wifi link to the router i think it may have been interrupted, after the update of the vmxkiller i tried the tftp process to upload the dd-wrt file this was successful, but the router keep rebooting and during it reboot shutdown time it broadcasts a dd-wrt ssid, but because the time between reboot and startup is so short there is no time to connect to it. I have tried almost all of the revival tip on the web except for the jtag and the shortcircut method which i don't really need to use since i can ping the router

anyone got a jtag cable to lend.

[daniboy79]

i don't know of any good openwrt hacks for later than V3~4 54G's, but i think you may have made a BIG mistake by attempting any updates over WiFi there, best of luck resolving.

[Redlum08]

i don't know of any good openwrt hacks for later than V3~4 54G's, but i think you may have made a BIG mistake by attempting any updates over WiFi there, best of luck resolving.

Usually Updates need to be done while hardwired to the router.....good luck Slaming.

[Fkacn_tt]

fixed something was wrong with the .bin file